ENVY BEAUTY SLIM

Beautiful Body shape begins with a Beautiful Clothing In This info is great for your body crave slim & healthy with natural way and 100% FREE OF SIDE EFFECTS!

It is suitable for anyone: students, teenagers, housewives, career women who are very active and busy, office workers, male and female, young and old.

Make Your Body with ENVY BODY MORE BEAUTIFUL SLIM


About Envy:

Envy Body Slim, health & body slimming underwear with: technology that summarizes the grain size of the infrared absorber hinggaskala 1: 1000 million but gave double function .- The effectiveness of up to 5 times more-quality-guaranteed products can be used anytime, anywhere-Safe to use immediately after melahirkanMengapa Envy Body Slim? Yes, because: This product has been tested and proven in Malaysia, Singapore, Thailand, Brunei and now in Indonesia.
Economical. Only once did pay for the use of up to THREE years, and you do not need to change the size of the corset as your body becomes lebihlangsing from the beginning, because, very elastic Envy Body Slim and lightweight - Infra Red makes it work up to 5 times more effective - Has a very soft texture material - You can feel the benefits within the first 14 days.
Comfortable to wear for any activity, to work, exercise, etc. kepesta.
Used without side effects after birth, It was Jagonya!

Envy Body Slim benefits:
Burn fat at the superabundant
Helps tighten hips
Avoid lifting the chest and thighs form a mengeleber / lax.
Comfortable when worn
It absorbs sweat and does not itch
Help and is well suited to a woman who just gave birth



5 Material Content of Basic Envy
Infrared Pellets 6-14 microns
Magnetic waves
Ion Titanium
Anti Germs Fibre
Materials weave high berelastis

Excess ENVY SLIM
Infrared rays have been shown to help blood circulation, excessive fat metabolism, slimming the body and relieve tired quickly, slimming the body and relieve tired quickly.
Impression massage helps remind Ionizing magentik wavy in the blood, blood circulation and provide a better health
Titanium ions help to kill and prevent bacterial growth, it is no longer any problem of body odor.
Anti-germ fiber-designed to prevent bacterial growth. Woven material with a distinguished high berelastis anti-roll function provide comfort and prepossessing physique.

Who should buy and wear?
Women's work
Housewife
Women after childbirth
Teenage girls
The husband who loves his wife
Women over 40 years

MAINTENANCE ENVY Envy Girdle & Corset And Envy Bodyslim
I envy wash after use, should be soaked in water without Molto at least 10 minutes. Only then be soaked in water + Molto / silky for 10-15 minutes (Do NOT use a washing machine, infra rednya can fall off) lift, then do not dry in direct sunlight just enough wind diangin dry really quickly because the material was designed that way.

Why the first 10 minutes should not be given Molto? because after use, infrared is still working, if working longer taxable Molto, it is feared will be less effective again after dicuci.Envy can really be washed once every 2-3 days if it is only used in the office alone.

Except when used gymnastics would be washed every hari.Kalau nga want to dishonor the blood of the new pants envy dikucek same liquid soap yes, DiKUCEK KUCEK ONLY on the rubber, DO in INFRA-RED nyaEnvy should not be washed with Detergent on the market generally contain soda and a filler material such as flour, if using detergents which contain a filler material to worry about a filler material left in the material ENVY became less clean and quickly decayed.

Read More......

OPERATING MANUAL DIGIDENS T6R

The DigiDens T6R is a robust and precise black and white densitometer for reproduction and printing houses. Due to its latest sensor and microprocessor technology it is small and handy in size, exceptional in precision and very easy to use. Density and percentage can be measured on transparent films as well as on reflection media like paper and printing plates (new version only).

You will find more technical data at the end of this manual.

The DigiDens T6R possesses the following important elements:

- 3 Pushbottons M, C, P

- 16-digit LCD-Display

- Lightsensor

- Battery case for 3 mignon cells

Each Pushbottons is used for 2 functions. The second function is initiated by pressing the button for longer period of time (>4 second). Pressing the red pushbuttons P (power) switches between reflection (‘R’) and Transmission (‘T’). the second function of the red pushbutton P switches the device on or off.

The center butoon C (calibrate) calibrates the device. Second function is the menue mode to modify some parameters.

Pressing butoon M (measure) initiates the measureing process. Second function is the switch to continuous mode (measuring continuously).

The measure value and the parameter modification is displayed on the 16-digit LCD-display.

The precise state of the art light sensor measures densities up to over density 6 in the transmission mode. The strong and constant reflection light source allows measurements up to more than density 2 in reflection mode. The accuracy of the measurements is excellent.

The device switches off automatically, if no button is pressed within 10 minutes. This feature helps minimizing battery consumption. The power source are 3 mignon cells (batteries or accumulators)

The Function In Details :

Button P :

The DigiDens T6R is Switched on with this button. If you switch on the device, you first will see the indication ‘walt’ to hold the button. If you release the button before the display switches to ‘DigiDens Cal’, the device switches off (to prevent the device from being switched on accidently). Right to the ‘walt’ you find the version number of the software (e.g V3.2). Now the device is ready and it should be calibrated for the mode you want to use it (‘R’ or ‘T’)

The switch off is also done with this button. Kepping the button pressed, leeds to ‘down’. Now you can release the button and the device is switched off.

Pressing the button P for less than 3 seconds toggles between reflection mode (‘R’) and transmission mode (‘T’). In reflection mode the integrated light source is switched on during the measuring period.

Button C :

With this center button C the calibration is done. The second function is the menue function to modify some parmeters…



Calibration For The Transmission Mode ‘T’ :

Mark a bright area of your light table with a circle as a measuring area. Inside this circle you do your calibration. Make sure, that ‘DigiDens’ onto clear film on the measuring area. Press button C for less 3 seconds to calibrate. Now the calibrate is done.

Calibration For The Reflection Mode ‘R’:

In this mode two measurements are recommended. One value for the white and one for the black (to value the reflection of the black). First make sure, that your “DigiDens” is in reflection mode and shows a ‘R’ in the display. Position the measuring spot of ‘DigiDens’ on the brightest white of your reflection media. Press button C to indicate the white. The display shows density 0 and percentage 0. Now position the measuring spot on the darkest (black) area and press button C again. This density is valuated as black. The display shows the density >0 and percentage 100. Now the calibration is finished. If white is interpreted as black (wrong handling, few cases), toggle the P button to reset the calibration. A new calibration of white invalidates the old black calibration too. If no black is calibration, density 1,8 is assumed to be 100%. For calibration on printing plates see parameter paper below.

Menue Mode :

If you hold the button C for longer than 4 seconds, the menue mode is initiated. This mode enables the user to modify some parameters.

The First step is

DotGain (Soft Dot) :

You see ‘DotGain’ followed by ‘T’ or ‘R’ on the display (depending in which mode you currently are) and the percentage of Dotgain in for the middle tones (around 50%). Factory setting is 0,0%. With button M you can increase this value in steps of 0,5%. With button P you can decrease this value in steps of 0,5%.

Pressing button C switches to the next parameter (step 2) Paper In Reflection mode R :

This parameter is only relevant for the reflection mode. The percentage values are calculated with the YULE-NIELSEN formula (an improved and generalized variant of the Murray-Davies formula). This formula allows the variationof paper parameters (from bright white paper with excellent black density to grey paper with poor black). The parameter varies from 1 to 40. Factory setting is the medium value 20. Choosing the right parameter needs some experiments in the beginning.

From version 2.9 on it is possible to measure the percentage of a variety of printing plates. Therefore the parameter Paper (better ‘media’ now) has been extended. Treat printing plates like paper media. The paper value is related to the contrast on a printing plate. The contrast (the density between the white calibration and the black calibration) on printing plates varies bwtween 0.8 and 1.6. if it is 0.8, paper value 9 might be a good choie, in case of contrast 1.6. paper value 13 might be used. To find the right paper values needs some experimenting, especially if your contrast is negative (negative printing plates). But the right paper value is found, the measuring is very stable.

Sens In Transmission Mode T (version 3.0) :

The sens parameter varies the sensitivity. The value is adjustable between 1 and 40. The factory setting is individual to the sensor (see battery cover inside). You also may use this feature to adjust to different light tables. There is the relation: increasing sensitivity results in falling accuracy. Increase this value only if you need to read high densities. The brighter your light source, the wider the density range (the better).

Pressing button C again leads to the next parameter (step 3) Slope Adjustment :

The slope adjustment feature enables the user to adjust the density of ‘DigiDens’ to anotherdensitometer. Despite the precision of ‘DigiDens’, there might be a need to vary the density values slightly for compatibility purposes. The dlope value can be varied between 1 and 200. The factory setting is 100, whichmean original slope. With button M you can increase the slope, each step increases the density about 0.33% (e.g. density 3.00 is increased to 3.01 by one step). With button P you can decrease the slope in the same way.

Pressing button C again leads to the next parameter (step 4) Display :

This parameter varies the display of the measured values.

The Values 1 to 7 represent

1. Show density and percentage, density first.

2. Show percentage and density, percentage first.

3. Show percentage only.

4. Show density only.

5. Like 1, percentage for negative measurement.

6. Like 2, percentage for negative measurement.

7. Like 3, percentage for negative measurement.



Factory setting is value 1. With button M you can increment this value, button P decrements this value.

Pressing the button C for a longer period of time (>4 second) leaves the menue mode and saves the current parameters (you see ‘save’ on the display). If you want to leave the menue mode without saving by pressing button P for a longer period of time.







Button M:

This button is the measuring button. In the measuring mode (not menue mode, where button M is the increment button) button M initiates the measuring process. It might take 1 to maximum 8 seconds until the values appear on the display. During this time ‘W’ for wait overloads the mode letter ‘R’ or ‘T’ to indicate, that the measuring process is in progress. Coming close to the sensitivity limit of the DigiDens T6R displays a > to indicate, that the density may be higher than displayed.

The longer times between 2 and 8 seconds only will appear in very dark areas (e.g. densities over 4) and only in transmission mode. Pressing the button M for a longer period of time will switch to continous mode (only in transmission mode). In this mode the ‘DigiDens’ measures continuous mode, press any button within this mode.

The 16 digits of the LCD-disply allow a guided and simple operation of ‘DigiDens T6R’. The density is leaded by the letter ‘D’, the percentage is trailed by the symbol ‘%’.

The rightmost letter is the mode letter ‘R’ for reflection and ‘T’ for transmission.

The continuous mode is indicated by a small ‘c’ left to the mode symbol. If the batteries go low, an indication ‘e’ for empty will be seen.

If you want the default parameters (factory settings) reactivated, than with button P you have to press button M simultaneously when switching on the device until ‘DigiDens Cal’ shows an a additional ‘r’ for reset. This last about 8 seconds.



Technical Data:

- Density max transmission. >6 D

Identical to >120 dB.

- Deviation density trans. +- 0,01 D

- Deviation percentage trans. +- 0,5 %

- Density reflection. >2 D

- Deviation density reflection. +- 0,02 D

- Deviation percentage refl. +- 0,5 %

- About 200 000 measurements transmission

100 000 measurements reflection

With one set of batteries (or accus)

- Input voltage 2.8 – 5.0 volts

- 3 x 1,5 volt mignon batteries

Or

- 3 x 1,2 volt mignon accus

- Measuring spot diameter 2,5 mm

To change batteries, open the battery case by unscrewing the battery cover. Please place the batteries carefully in the right direction (as shown by the battery symbols) into the battery case.



To let the device always supply reliable values, keep the area around the measuring spot clean. To avoid unwanted infrared influence (in density ranges higher than 5 is some despite the IR-blocking filter), follow this device:

Don’t expose your DigiDens T6R to heat and in particular. Don’t leave the DigiDens T6R and the films you want to measure on the light table while not using.

Measuring on a light table means relying on the light source of this table. Check from time to time if the light source is still stable.

The power source (batteries or accumulators) should be checked from time to time. Beside cleaning frequently, no further maintenance is necessary.





This product is subject to change without notice ColorPartner GmbH

Lise-Meitner-Str 1 – 7

24223 raisdorf

Germany

Read More......

OPERATING MANUAL DIGIDENS T6R

The DigiDens T6R is a robust and precise black and white densitometer for reproduction and printing houses. Due to its latest sensor and microprocessor technology it is small and handy in size, exceptional in precision and very easy to use. Density and percentage can be measured on transparent films as well as on reflection media like paper and printing plates (new version only).

You will find more technical data at the end of this manual.

The DigiDens T6R possesses the following important elements:

- 3 Pushbottons M, C, P

- 16-digit LCD-Display

- Lightsensor

- Battery case for 3 mignon cells

Each Pushbottons is used for 2 functions. The second function is initiated by pressing the button for longer period of time (>4 second). Pressing the red pushbuttons P (power) switches between reflection (‘R’) and Transmission (‘T’). the second function of the red pushbutton P switches the device on or off.

The center butoon C (calibrate) calibrates the device. Second function is the menue mode to modify some parameters.

Pressing butoon M (measure) initiates the measureing process. Second function is the switch to continuous mode (measuring continuously).

The measure value and the parameter modification is displayed on the 16-digit LCD-display.

The precise state of the art light sensor measures densities up to over density 6 in the transmission mode. The strong and constant reflection light source allows measurements up to more than density 2 in reflection mode. The accuracy of the measurements is excellent.

The device switches off automatically, if no button is pressed within 10 minutes. This feature helps minimizing battery consumption. The power source are 3 mignon cells (batteries or accumulators)

The Function In Details :

Button P :

The DigiDens T6R is Switched on with this button. If you switch on the device, you first will see the indication ‘walt’ to hold the button. If you release the button before the display switches to ‘DigiDens Cal’, the device switches off (to prevent the device from being switched on accidently). Right to the ‘walt’ you find the version number of the software (e.g V3.2). Now the device is ready and it should be calibrated for the mode you want to use it (‘R’ or ‘T’)

The switch off is also done with this button. Kepping the button pressed, leeds to ‘down’. Now you can release the button and the device is switched off.

Pressing the button P for less than 3 seconds toggles between reflection mode (‘R’) and transmission mode (‘T’). In reflection mode the integrated light source is switched on during the measuring period.

Button C :

With this center button C the calibration is done. The second function is the menue function to modify some parmeters…



Calibration For The Transmission Mode ‘T’ :

Mark a bright area of your light table with a circle as a measuring area. Inside this circle you do your calibration. Make sure, that ‘DigiDens’ onto clear film on the measuring area. Press button C for less 3 seconds to calibrate. Now the calibrate is done.

Calibration For The Reflection Mode ‘R’:

In this mode two measurements are recommended. One value for the white and one for the black (to value the reflection of the black). First make sure, that your “DigiDens” is in reflection mode and shows a ‘R’ in the display. Position the measuring spot of ‘DigiDens’ on the brightest white of your reflection media. Press button C to indicate the white. The display shows density 0 and percentage 0. Now position the measuring spot on the darkest (black) area and press button C again. This density is valuated as black. The display shows the density >0 and percentage 100. Now the calibration is finished. If white is interpreted as black (wrong handling, few cases), toggle the P button to reset the calibration. A new calibration of white invalidates the old black calibration too. If no black is calibration, density 1,8 is assumed to be 100%. For calibration on printing plates see parameter paper below.

Menue Mode :

If you hold the button C for longer than 4 seconds, the menue mode is initiated. This mode enables the user to modify some parameters.

The First step is

DotGain (Soft Dot) :

You see ‘DotGain’ followed by ‘T’ or ‘R’ on the display (depending in which mode you currently are) and the percentage of Dotgain in for the middle tones (around 50%). Factory setting is 0,0%. With button M you can increase this value in steps of 0,5%. With button P you can decrease this value in steps of 0,5%.

Pressing button C switches to the next parameter (step 2) Paper In Reflection mode R :

This parameter is only relevant for the reflection mode. The percentage values are calculated with the YULE-NIELSEN formula (an improved and generalized variant of the Murray-Davies formula). This formula allows the variationof paper parameters (from bright white paper with excellent black density to grey paper with poor black). The parameter varies from 1 to 40. Factory setting is the medium value 20. Choosing the right parameter needs some experiments in the beginning.

From version 2.9 on it is possible to measure the percentage of a variety of printing plates. Therefore the parameter Paper (better ‘media’ now) has been extended. Treat printing plates like paper media. The paper value is related to the contrast on a printing plate. The contrast (the density between the white calibration and the black calibration) on printing plates varies bwtween 0.8 and 1.6. if it is 0.8, paper value 9 might be a good choie, in case of contrast 1.6. paper value 13 might be used. To find the right paper values needs some experimenting, especially if your contrast is negative (negative printing plates). But the right paper value is found, the measuring is very stable.

Sens In Transmission Mode T (version 3.0) :

The sens parameter varies the sensitivity. The value is adjustable between 1 and 40. The factory setting is individual to the sensor (see battery cover inside). You also may use this feature to adjust to different light tables. There is the relation: increasing sensitivity results in falling accuracy. Increase this value only if you need to read high densities. The brighter your light source, the wider the density range (the better).

Pressing button C again leads to the next parameter (step 3) Slope Adjustment :

The slope adjustment feature enables the user to adjust the density of ‘DigiDens’ to anotherdensitometer. Despite the precision of ‘DigiDens’, there might be a need to vary the density values slightly for compatibility purposes. The dlope value can be varied between 1 and 200. The factory setting is 100, whichmean original slope. With button M you can increase the slope, each step increases the density about 0.33% (e.g. density 3.00 is increased to 3.01 by one step). With button P you can decrease the slope in the same way.

Pressing button C again leads to the next parameter (step 4) Display :

This parameter varies the display of the measured values.

The Values 1 to 7 represent

1. Show density and percentage, density first.

2. Show percentage and density, percentage first.

3. Show percentage only.

4. Show density only.

5. Like 1, percentage for negative measurement.

6. Like 2, percentage for negative measurement.

7. Like 3, percentage for negative measurement.



Factory setting is value 1. With button M you can increment this value, button P decrements this value.

Pressing the button C for a longer period of time (>4 second) leaves the menue mode and saves the current parameters (you see ‘save’ on the display). If you want to leave the menue mode without saving by pressing button P for a longer period of time.







Button M:

This button is the measuring button. In the measuring mode (not menue mode, where button M is the increment button) button M initiates the measuring process. It might take 1 to maximum 8 seconds until the values appear on the display. During this time ‘W’ for wait overloads the mode letter ‘R’ or ‘T’ to indicate, that the measuring process is in progress. Coming close to the sensitivity limit of the DigiDens T6R displays a > to indicate, that the density may be higher than displayed.

The longer times between 2 and 8 seconds only will appear in very dark areas (e.g. densities over 4) and only in transmission mode. Pressing the button M for a longer period of time will switch to continous mode (only in transmission mode). In this mode the ‘DigiDens’ measures continuous mode, press any button within this mode.

The 16 digits of the LCD-disply allow a guided and simple operation of ‘DigiDens T6R’. The density is leaded by the letter ‘D’, the percentage is trailed by the symbol ‘%’.

The rightmost letter is the mode letter ‘R’ for reflection and ‘T’ for transmission.

The continuous mode is indicated by a small ‘c’ left to the mode symbol. If the batteries go low, an indication ‘e’ for empty will be seen.

If you want the default parameters (factory settings) reactivated, than with button P you have to press button M simultaneously when switching on the device until ‘DigiDens Cal’ shows an a additional ‘r’ for reset. This last about 8 seconds.



Technical Data:

- Density max transmission. >6 D

Identical to >120 dB.

- Deviation density trans. +- 0,01 D

- Deviation percentage trans. +- 0,5 %

- Density reflection. >2 D

- Deviation density reflection. +- 0,02 D

- Deviation percentage refl. +- 0,5 %

- About 200 000 measurements transmission

100 000 measurements reflection

With one set of batteries (or accus)

- Input voltage 2.8 – 5.0 volts

- 3 x 1,5 volt mignon batteries

Or

- 3 x 1,2 volt mignon accus

- Measuring spot diameter 2,5 mm

To change batteries, open the battery case by unscrewing the battery cover. Please place the batteries carefully in the right direction (as shown by the battery symbols) into the battery case.



To let the device always supply reliable values, keep the area around the measuring spot clean. To avoid unwanted infrared influence (in density ranges higher than 5 is some despite the IR-blocking filter), follow this device:

Don’t expose your DigiDens T6R to heat and in particular. Don’t leave the DigiDens T6R and the films you want to measure on the light table while not using.

Measuring on a light table means relying on the light source of this table. Check from time to time if the light source is still stable.

The power source (batteries or accumulators) should be checked from time to time. Beside cleaning frequently, no further maintenance is necessary.





This product is subject to change without notice ColorPartner GmbH

Lise-Meitner-Str 1 – 7

24223 raisdorf

Germany

Read More......

10 tips how to care for contact lenses

1. Remove contact lenses before you sleep.

2. Take care of contact lenses with a suitable liquid. Do not use any cleaning solution. Therefore, the product handling can harm the lens and your eye health.

3. Wear protective goggles to avoid dust and wind get into your eyes.

4. Check your eyes and contact lenses regularly for abnormalities as early as possible.

5. Observe also the instructions given in the contact lens packaging.


6. Pay attention to your contact lens hygiene. The dirt will make the infection in the eye.

7. Use eye drops specifically for contact lenses, eye drops instead of ordinary.

8. Clean regularly contact lens container with boiling water then dry. This is intended to kill the germs on your contact lens container.

9. Replace your contact lenses so your eyes begin to feel uncomfortable wearing them. It indicates the condition of contact lens is no good anymore to help your eyesight.

10. Always wash your hands before removing or wear contacts.

Read More......

Review Of Geo Contact Lens

I have nearsightedness since I was a kid and I’ve always hated wearing glasses because first, it’s a hassle to wear glasses since it blocks my peripheral vision, and second, because it doesn’t always match with my clothes and I look like a geek. I used to buy clear disposable contact lenses, but eventually I got tired of using them since I had to change my pair after every two months.


Then I read about Geo Contact Lens. Geo Contact Lenses are from Korea, they are safe to use since they have KGMP & ISO certification. Authenticity may be checked through the Geo stickers that are included in the order. It really caught my interest since the price is really cheap for a pair that is good for one year compared to the ones that can be bought in local optical shops. I purchased one last March, and it’s still the pair I’m using up to now and I must say I’m fully satisfied with it. It’s safe; it doesn’t irritate my eyes as long as I clean it regularly. I wear it for more than 10 hours almost every day and it’s still as soft comfortable as before unlike the disposable ones which, when expired, feels thicker and harder when you wear them. Sometimes I even sleep while wearing them, and nothing disastrous has happened yet, although that’s unintentional and not advisable of course, for any brand of contacts for that matter. Geo Contact Lens comes in a variety of types and colors, and their crazy lens collection never fails to amuse me. Currently mine is the CM-905 one which is the 3tone Magic color, it’s dark purple on the outer rim, light purple on the middle, and light brown on the inner, and I’m proud of it since my friends always mistake me for wearing a different pair of contacts every time they see me, since the 3tone style can trick the audience depending on the lighting in the environment.
When my Geo Contact Lens expires, I’m looking forward to buying the same brand again.

Read More......

Tips for Beautiful Eyes with the Contact Lens

Beauty of your eyes will shine, not only because of makeup worn. Eye color can be changed to make it look more shiny and attractive. No black color only can you show, but you can change it to brown, blue, green and so forth. For those of you who wear glasses, maybe contact lens can be a style for your appearance to look more natural. Currently, contact lenses that adorn the eyes is increasingly growing, not only the color but also form eyes. There is shaped flowers, eyes cat, lines and so forth. Contact lens or the so-called soft lens, is now not just for style and change the appearance but also help eyesight, too. For those of you who have a lot of activity, sometimes use glasses would interfere with its appearance and your space. So soft lens is needed because it will give a more free and wide, soft lens will also not be wet or damp when you get wet. Especially for those who like to work under the lens, like wrestle photography, mikrosop the soft lens will actually needed for comfort You. Brown color and the color blue has become a favorite among women because it will change your appearance more beautiful. Wearing soft lens indeed not as easy as you might think they really need particular care you have to do. Before you change the appearance, replacing eyeglasses with a soft lens then you may have to choose colors that fit with the character You. Using a soft lens has a specific period, anyone can apply for one year, one month, two months until one day. Soft lenses are made of soft plastic with water content in it. The more the period is less then the water content in soft lens usually higher so that more comfortable to wear. If you want to wear soft lens with a period of one years, the treatment is not only replace the fluid every day. But every week you should clean it with tablets to remove protein and germ present in the lens. As for the disposable or may be disposed of after the period of usage usually will be cleaner and healthier to use. It may even be in period ahead, a contact lens with a period of one year in clear, instead of disposable. If you want to use a soft lens should choose disposable soft lens is the best option. Because it will be healthier and maintenance is also easier than the annual soft lens.

Read More......

BARBIE PRINCESS GEISHA (17.5mm)

Hi, sis ... now we provide a Geisha PRINCESS BARBIE STILL WITH 17.5MM
Lens Barbie with a large diameter (not tablets effects !!).. so make your eyes like a doll ..:) shall be held ..
The effect is to make your eyes like a princess geisha ..
WOW ... it's so perfect .. .. Every purchase 1 pair of FREE CASE ANIMAL
(By request) PUMA FREE CASE THAT FUNNY ... So, Happy Shopping all ...^^

Read More......